This mount hides the original Apple power adapter (18 W/20 W) and the HomePod mini cable completely inside. The HomePod mini can be seen in all its glory.
Product information
The mount fits tightly around the power adapter, and the cavity stores the entire cable. The HomePod mini stands on the mount and is held lightly by the cable. As the mount is open towards the outlet and has enough clearance, there is sufficient air circulation even in continuous operation.
Scope of delivery: Mount + Schuko adapter for the outlet.
HomePod mini and power adapter are for presentation purposes only and are not included.
Size & weight
- 80 mm wide, 38 mm high, 69 mm deep
- approx. 57 g (mount incl. adapter)
- Once installed, the mount incl. HomePod mini is approx. 10.4 cm high (measured from the centre of the outlet to the top edge). You need at least this much space above your outlet.
Product video
Manufacturing
The mount is made using FDM 3D printing with a fine layer height of 0.16 mm. The fine “ridges” typical of 3D printing are present, but only visible up close.
Only branded PLA (polylactide) filament with a matte finish and slightly rubberised feel is used for printing.
Colours: White = RAL 9003 | Black = RAL 9017.
Each piece is 100 % handmade, so there may be minimal variations in appearance.
Do not heat above 50 °C, as this may cause permanent deformation!
Further finishing
The mount can be finished further. As long as the plastic is not heated above 50 °C, you can:
- sand it (removes the fine ridges completely)
- prime it
- varnish / paint it
Reviews
There are no reviews yet.